This project features blue vinyl wrap applied to a faded door handle on a blue car.
The tutorial demonstrates how an installer revives a clapped-out door handle using a small piece of vinyl wrap. Covering the damaged surface provides a clean, refreshed appearance without replacing the door handle or repainting the door.
Door Handle Wrap Steps
The installer demonstrates the step-by-step wrapping process:
- Lay the vinyl and work all the air out from underneath.
- Cut the material down to shape, using the opposite edge so enough vinyl remains for tucking.
- Remove the excess film around the handle.
- Apply heat around the edges and tuck the film into place with a squeegee.
- Cut out the keyhole and remove the remaining excess material.
Following these steps ensures the vinyl adheres cleanly around the tight curves and recessed keyhole.
Film Features
Aura Vinyl vinyl wrap uses a cast polymer hybrid film with German-made adhesive and a PET-backed finish. It offers an expected lifespan of 3 to 5 years when maintained with regular hand washing.
FAQ
How do you wrap a car door handle with vinyl?
First, work all the air out and cut the vinyl down to shape using the opposite edge to leave enough material to tuck. Next, remove excess film, apply heat around the edges, tuck the material with a squeegee, and cut out the keyhole.
Can vinyl wrap restore a faded car door handle?
Yes, applying a small piece of vinyl wrap can bring a worn or faded door handle back to life. Trimming, heating, and tucking the film gives the handle a refreshed finish.
How long does Aura Vinyl vinyl wrap last?
With proper care, Aura Vinyl vinyl wrap has an expected lifespan of 3 to 5 years. Recommended care includes hand washing at least every two weeks with vinyl-safe products and applying a ceramic coat before the wrap sees sun.