This vinyl wrap tutorial demonstrates how to fix severe wrinkles on a 2003 to 2007 Infiniti G35 quarter panel.
During the installation process, the film bunches up across the panel, presenting a common challenge for wrap installers. The video outlines three choices: attempt to squeegee out the wrinkles, remove the entire piece to restart, or pick up the material, apply heat, and reglass it flat.
How to Fix Wrinkles
The correct approach is the third option. Trying to squeegee through heavy wrinkles will create permanent creases, glue lines, or tears. Completely tearing off the sheet wastes film and unnecessary time. Instead, carefully peel the wrinkled section back from the car body. Apply moderate heat to the vinyl to trigger its memory effect and relax the built-up tension. Once the material returns to its flat state, stretch it evenly back over the panel to glass the surface before finishing with a squeegee.
Material Performance
Aura Vinyl wrap uses a cast polymer hybrid construction with German-made adhesive and PET backing to support clean repositioning during corrections like this.
FAQ
What should you do when vinyl wrap wrinkles during installation?
Lift the wrinkled vinyl away from the panel and apply heat to relax the material. Once the tension resets, reglass the film flat against the car before squeegeeing.
Can you squeegee out severe vinyl wrap wrinkles directly?
No, forcing severe wrinkles flat with a squeegee will cause permanent creases and damage the vinyl. The film must be picked up and heated to reset properly.