This tutorial demonstrates how to fix vinyl wrap wrinkles on a silver 2003 to 2007 Infiniti G35. The video shows an installer repairing a heavily wrinkled section of vinyl wrap on a car fender to achieve a smooth surface.
Steps to Remove Vinyl Wrinkles
Start by lifting the entire wrinkled area off the panel. Next, heat up the lifted vinyl so it relaxes back into place. After applying heat, glass the vinyl flat across the panel. Then use a squeegee or wrap glove to push all trapped air out from behind the film. If a large air bubble develops, create an escape pocket so the air can exit smoothly. Lift that section again and squeegee it down to complete the repair.
Aura Vinyl Wrap Features
Aura Vinyl vinyl wrap uses a cast polymer hybrid film with German-made adhesive that assists with repositioning and minimizes glue lines during tough installs. The PET-backed finish provides a smooth appearance with less orange peel.
FAQ
How do you fix wrinkles in vinyl wrap?
Lift the entire wrinkled area from the car panel and apply heat across the lifted material. Once the film relaxes, glass it down and squeegee the air out.
What should you do if a large bubble forms under vinyl wrap?
Create an open pocket along the vinyl so the trapped air has a path to escape. Then lift that section and squeegee it flat against the panel.
What makes Aura Vinyl vinyl wrap easy to reposition?
Aura Vinyl vinyl wrap features a cast polymer hybrid construction with German-made adhesive. This adhesive aids in repositioning and helps prevent glue lines.