This video shows a grey vinyl wrap being installed on a 2019-2024 Audi A7 door. The installer demonstrates an effective technique for wrapping a door panel when working in colder shop temperatures.
Door Wrapping Steps
The process begins by glassing out the first half of the door. The installer tacks the vinyl down along the body line to lock it into place, then glasses out the other side. Once the film is anchored, squeegee from the body line upward toward the window. Next, work below the body line by squeegeeing all the way across the panel. Always overlap squeegee strokes so trapped air flows out evenly.
Cold Weather Technique
Working in a cold shop can make it difficult to heat and glass out an entire sheet of vinyl at once. To make the process manageable, the installer splits the bottom section into two separate areas. He picks up the right section, applies heat, and glasses it down cleanly. To finish the door, squeegee out the remaining air, trim the vinyl to shape, and remove the excess material.
Aura Vinyl vinyl wrap features a cast polymer hybrid build with German-made adhesive and a PET-backed finish for smooth application.
FAQ
How do you wrap a car door in cold shop temperatures?
You can split the lower door area into two separate sections. Lifting and heating smaller sections makes it easier to glass out the material when cold weather makes large sheets hard to manage.
Why is it important to overlap squeegee strokes?
Overlapping your squeegee strokes ensures that air flows out evenly across the panel. This helps prevent trapped air pockets along body lines and flat surfaces.
Where should you lock in the vinyl on an Audi A7 door?
After glassing out the first half of the door, tack the film down along the body line to lock it in place. Then squeegee upward above the line and downward below it.