This installation tutorial focuses on vinyl wrap application on a white 2012-2016 Audi A5. The video demonstrates what happens when vinyl wrap is overstretched around the curves of a vehicle body. Overstretching means taking the material past its physical limits, which leads to issues later in the install.
Avoiding Overstretch
When film is pulled too far, it often pulls back and fails after you cut it down and apply post-heat. To keep the material stable, follow these steps during installation:
- Apply heat to the vinyl wrap material.
- Let the film cool down slightly before stretching.
- Hold light tension across the film without pulling too hard.
- Allow the material to conform to the natural shape of the car.
- Cut the edges and complete your post-heating routine.
Following this technique ensures the vinyl stays firmly in place without shrinking back or lifting from the panel.
Film Quality
Aura Vinyl produces cast polymer hybrid vinyl wrap featuring German-made adhesive and a PET-backed finish.
FAQ
What does overstretching vinyl wrap mean?
Overstretching means pulling the wrap material past its normal limits. This causes tension that can make the vinyl pull back and fail after cutting.
Why does overstretched vinyl fail after post-heating?
When vinyl is stretched too far, heating causes the material to pull back. This pullback causes edges and recessed areas to lift away from the vehicle surface.
How do you prevent vinyl wrap from overstretching?
After applying heat, let the material slightly cool down. Then hold tension on the film without pulling too hard so it takes the natural shape of the car.