This tutorial demonstrates vinyl wrap application on a white Tesla Model 3. The clip shows an installer working on the front fender and explaining how to control tension during installation.
Proper Tension Technique
Tension is the most important concept to master when wrapping a vehicle panel. Pulling too hard with your left hand causes wrinkles to form in one direction. Pulling too hard with your right hand forces wrinkles to stretch the opposite way.
To fix this problem, apply even tension by pulling outward and downward at the same time. This balanced motion glasses out the material smoothly against the fender. After the vinyl glasses out, work out all the trapped air across the panel for a clean result.
Aura Vinyl Film Features
The wrap shown uses Aura Vinyl premium vinyl wrap. Aura Vinyl films feature a cast polymer hybrid construction paired with German-made adhesive for flexibility and repositioning. The material also includes a PET backing designed to deliver a smooth finish on vehicle surfaces.
FAQ
How do you glass out vinyl wrap on a car fender?
Pull the vinyl with even tension outward and downward using both hands. This balances the pressure, eliminates directional wrinkles, and allows you to work out the trapped air.
Why does vinyl wrap wrinkle during installation?
Wrinkles occur when tension is uneven between your hands. Pulling harder with one hand pulls the film off balance and creates directional wrinkles across the panel.
What adhesive does Aura Vinyl use?
Aura Vinyl uses German-made adhesive on its cast polymer hybrid films. This adhesive supports repositioning and pliability during the wrap process.