This tutorial demonstrates the proper seaming method using silver vinyl wrap on a vehicle panel. Trying to cut two layers of vinyl wrap with a single strand of knifeless tape does not work. When you pull one piece of tape through two layers at once, you leave excess material from the bottom sheet underneath the cut line.
Proper Seam Steps
To create a clean overlap, install each layer separately instead of cutting both at the same time:
- Lay down your first piece of knifeless tape along the planned seam line.
- Apply your first layer of vinyl over the tape.
- Pull the knifeless tape through and remove the excess vinyl.
- Place a second strip of knifeless tape to define your overlap edge.
- Lay down the overlapping piece of vinyl, pull the tape, and remove the excess material.
Clean Overlaps on Body Lines
Cutting each layer in order leaves a much cleaner finish. While a visible seam line can show up on a flat test panel, placing your seam along a body curve conceals the overlap so it is not noticeable.
Aura Vinyl offers vinyl wrap with a PET backing and German-made adhesive across more than 500 colors.
FAQ
Can you cut two overlapping vinyl sheets with one piece of knifeless tape?
No, because pulling the tape through both layers leaves a larger section of vinyl underneath.
How do you hide a vinyl wrap seam?
Placing the overlap along a body curve helps hide the seam line so it is not noticeable.