This installation tutorial shows how to properly lay vinyl wrap into a recessed door handle cup. The video demonstrates the technique for wrapping deep recesses without overstretching the material. An installer works the vinyl down carefully using a gloved hand rather than shoving bare fingers into the cup.
Door Cup Wrap Steps
To get a smooth result, follow these steps from the demonstration:
- Heat the entire door handle cup before working the film.
- Let the vinyl cool for three to five seconds.
- Glove the material down with your thumb starting from one side.
- Overlap each stroke inside the cup while keeping a steady pace.
Working across the cup at a consistent pace ensures the material settles into place without requiring extra heat.
Clean Finish and Film Care
Rushing the recess or pushing fingers in without practice can distort the material or cause lifting. Aura Vinyl cast polymer hybrid vinyl wrap uses German-made adhesive and a PET-backed finish for a flatter look. To keep wrapped surfaces in top shape, hand wash the car every two weeks and avoid drive-through car washes or harsh solvents.
FAQ
How do you wrap a door handle cup with vinyl?
Heat the door handle cup area and allow it to cool for three to five seconds. Then, use a gloved thumb to work the vinyl down from one side using overlapping strokes at a consistent pace.
Why should you let the vinyl cool before pressing into a door cup?
Allowing the vinyl to cool for three to five seconds helps you glove the material down cleanly without having to reheat the film.