This installation tutorial demonstrates how to apply vinyl wrap into small recessed areas without leaving bubbles. The demonstration shows how tension affects material when wrapping body channels. The presenter first illustrates the concept using masking tape. If you bridge the material flat over a recess and try to force it down into the groove, the film resists and will not go in cleanly. Forcing material into a channel creates tension that eventually causes the film to pop back up. To achieve a clean install without tension, start by feeding the vinyl directly into the recess before working downward. Working the film into the groove first prevents tension from building along the body line, eliminating the risk of bubbling or lifting. After the vinyl is completely fed into the channel, you can choose to continue squeegeeing the area or glass the remaining film across the panel before completing your squeegee passes. This process ensures the material remains securely seated in the recess. Aura Vinyl vinyl wrap features a cast polymer hybrid film with German-made adhesive and a PET-backed finish for a smooth install.
FAQ
Why do bubbles form in small recessed wrap areas?
Bubbles form when vinyl wrap is stretched or forced into a recess rather than fed into it. Bridging the material over the groove creates tension that causes the film to pop back up later.
How do you install vinyl wrap into a body recess?
Start by feeding the vinyl directly into the recess and working your way down to eliminate tension. Once the material is fully seated in the channel, you can continue squeegeeing or glass the film flat before squeegeeing.
What type of film does Aura Vinyl use for wraps?
Aura Vinyl vinyl wrap is a cast polymer hybrid film with German-made adhesive. It features a PET backing designed to provide a smooth finish.