This installation tutorial shows how to wrap a corner cleanly on a white car with vinyl wrap. The video demonstrates an effective technique for managing sharp vehicle corners without wrinkles or bunching.
Corner Wrapping Steps
Getting a clean corner requires controlled heating and trimming. In the video, the installer follows these steps:
- Heat up the material and pull it firmly over the corner.
- Apply heat again and allow the film to shrink back up to the corner.
- Let the material cool completely.
- Take your blade and cut right on the bottom edge of the corner.
- Tack down any lifted-up pieces to secure the edge.
Following this method keeps the vinyl seated flat and creates a clean edge along the panel corner.
Vinyl Wrap Details
Aura Vinyl vinyl wrap features a PET-backed finish that delivers a flat look with less orange peel. The cast polymer hybrid film uses German-made adhesive to improve pliability and repositioning during installation. With proper care, vinyl wrap has an expected lifespan of 3 to 5 years.
FAQ
How do you wrap a sharp vehicle corner with vinyl wrap?
Heat the material and pull it over the corner, then heat it again to let it shrink back. Once the material cools, cut right on the bottom edge and tack down any lifted pieces.
Where do you cut the film when wrapping a corner?
After the material has cooled down, take your blade and cut directly on the bottom edge of the corner.