This tutorial demonstrates installing red vinyl wrap on a 1998 to 2006 Audi TT.
Wheel Well Wrap Technique
The video demonstrates how to wrap and trim film cleanly around a car wheel well arch. Beginners often leave excess material hanging inside wheel wells, which leaves loose vinyl flapping around after the job is done. Ensuring full coverage without leaving extra bulk is critical for a durable edge.
Trimming Steps
To get a clean edge, follow the method demonstrated in the clip:
- Warm the material thoroughly with heat.
- Run your finger as far into the inner edge as possible to seat the film.
- Lay your utility blade flat against the furthest part of the edge.
- Cut along the lip to remove the excess strip.
This technique keeps the vinyl secure against the wheel arch and prevents loose flaps. For projects like this, Aura Vinyl supplies cast polymer hybrid vinyl wrap engineered with German adhesive and PET backing to assist with clean tucking and repositioning.
FAQ
Why does vinyl wrap flap inside the wheel well?
Flapping occurs when beginners leave too much excess material inside the wheel arch instead of trimming it flush against the edge.
How do you properly trim vinyl wrap along a wheel arch?
Heat the vinyl and press it deep into the edge with your finger. Next, place the knife blade on the furthest part of the edge and cut away the excess material.