This installation demonstrates how to wrap a recessed door handle on a black 1992 to 2002 Mazda RX-7 using vinyl wrap.
Wrapping a Recessed Door Handle
Non-traditional door handles can seem tricky, but breaking the area down into separate pieces makes the process manageable. The video shows an installer tackling the deep recess of an RX-7 handle using an inlay and an overlay piece.
Here are the install steps shown in the video:
- Lay knifeless tape along the interior body line of the door handle.
- Set the first piece of film, use heat and a glove to work it into the cup, then pull the knifeless tape and peel the excess.
- Apply the main overlay piece across the face of the handle.
- Trim the outer edges, leaving one-eighth of an inch on the lower section, and tuck all borders with a squeegee.
Aura Vinyl Film Features
Aura Vinyl vinyl wrap is built as a cast polymer hybrid film with German-made adhesive. This adhesive setup gives installers flexibility for repositioning and prevents unwanted glue lines during tricky tucks. The material also uses a PET-backed finish to reduce orange peel, with an expected lifespan of 3 to 5 years when maintained with regular hand washing.
FAQ
How do you wrap a recessed door handle on a Mazda RX-7?
Break the handle into multiple pieces instead of wrapping it in one sheet. Apply knifeless tape along the body line, set the cup inlay with heat and a glove, pull the tape, and apply the outer overlay before tucking the edges.
How much vinyl should you leave to tuck around the handle edges?
On the lower section of the handle, leave about one-eighth of an inch of material to tuck behind the edge with a squeegee.
What kind of film is Aura Vinyl vinyl wrap?
Aura Vinyl vinyl wrap is a cast polymer hybrid film with a PET-backed finish and German-made adhesive. It offers an expected lifespan of 3 to 5 years when cared for properly.