This video shows a vinyl wrap installation on the mirror cap of a silver car. The clip focuses on the audio and visuals of the wrapping process from start to finish.
Mirror Cap Wrap Steps
Wrapping a side mirror requires working with curved surfaces and deep contours. The installer begins by heating the vinyl film to make it pliable. Once heated, the material is stretched evenly over the mirror housing to avoid tension lines and wrinkles.
Next, the installer uses a squeegee to lay the film down smoothly. Squeegee strokes move from the center outward to push out air pockets and secure the adhesive against the painted surface. After setting the face of the mirror, the installer works the film around the back edges and seams. A sharp blade trims away the excess vinyl along the body lines, leaving clean edges.
Film Features and Care
Aura Vinyl vinyl wrap features a PET backing that creates a smooth finish with reduced orange peel. The film is built with a cast polymer hybrid construction and German-made adhesive, allowing for clean repositioning and fewer glue lines during curved installations like mirror caps.
With proper care, vinyl wrap has an expected lifespan of 3 to 5 years. For the best longevity, hand wash the wrapped parts at least every two weeks using vinyl-safe car wash products.
FAQ
How do you wrap a side mirror cap with vinyl?
An installer heats the vinyl wrap film to make it pliable, stretches it evenly over the mirror contours, squeegees out any trapped air, and trims the excess material around the edges.
How long does vinyl wrap last on vehicle parts like mirror caps?
Aura Vinyl vinyl wrap has an expected lifespan of 3 to 5 years with proper care. Regular hand washing helps protect the film over time.