This installation guide covers a 2010 to 2024 Toyota 4Runner featuring a metallic green color with a gloss finish.
The video demonstrates how to remove two giant wrinkle sections after glassing out a vehicle door.
Step-by-Step Wrinkle Removal
Instead of trying to work the entire wrinkled area as a whole, the installer splits the material down the center to create two separate sections.
To fix the first side, lift the material up and apply heat across the entire lifted sheet. Once heated, glass out the film to create a smooth surface. Next, squeegee out all the air until you reach the door recess.
After completing the first side, repeat the exact same steps on the opposite side. Lift the vinyl, apply heat to relax the wrinkles, and glass it out again. Squeegee the remaining trapped air down into the recess. You can repeat this process across the rest of the door panel whenever wrinkles gather.
Film Features and Support
Aura Vinyl films feature a cast polymer hybrid construction with German-made adhesive and a PET backing designed to provide a smooth finish with reduced orange peel. Installers working through tricky panels can access Discord installer support, instructional playlists, and Wrap Academy training.
FAQ
How do you fix large wrinkles when wrapping a door?
Divide the wrinkled vinyl into two separate sections from the center. Lift one side, apply heat across the lifted sheet, glass it out, and squeegee the air down to the recess before repeating on the other side.
What should you do after heating the lifted vinyl?
Glass out the film so the surface becomes smooth. Then squeegee out all the air until you reach the recess.
Where can beginners get help with vinyl wrap installation?
Aura Vinyl offers beginner support through Discord installer help, tailored video playlists, install tips, and optional Wrap Academy classes.