This prep tutorial covers emblem removal on a metallic grey 2016 to 2023 Toyota Tacoma with factory metallic paint finish.
The video demonstrates why you should never leave vehicle emblems on a panel while trying to wrap. Removing the badges ensures a clean finish and allows the vinyl film to lay flat across the entire panel.
Steps for Clean Emblem Removal
Follow these steps shown in the video to prep your vehicle badges:
- Use fishing line and elbow grease to cut through the emblem adhesive and pull the badge off.
- Attach a rubber wheel to a drill to strip off the remaining adhesive from the paint.
- Wipe away the loose rubber dust using a dry microfiber towel.
- Clean the panel before laying down the film.
Some installers leave leftover tape behind to mark badge placement, but taking off the adhesive completely creates a much cleaner finish. Once the panel is dusted and prepped, it is ready for material. Aura Vinyl vinyl wrap offers a PET-backed finish and German-made adhesive to give installers clean repositioning and fewer glue lines during install.
FAQ
How do you remove vehicle emblems before wrapping?
Use fishing line and elbow grease to slice through the adhesive behind the emblem. The badge will come right off the vehicle panel.
How do you get leftover emblem adhesive off car paint?
Attach a rubber wheel to a drill and run it over the leftover adhesive. Then wipe away the dust with a dry microfiber towel before spraying any alcohol cleaner.
Should you leave emblem adhesive on to mark badge placement?
No, leaving adhesive behind does not provide a clean finish. All residual tape should be removed with a rubber wheel so the panel surface is flat and ready to wrap.