This tutorial demonstrates how to tuck vinyl wrap edges on a white 2017-2020 Tesla Model 3. The video shows an installer wrapping along non-removable window trim to get a clean edge without disassembling the vehicle.
Trim Tucking Steps
Tucking vinyl beneath tight trim gaskets can cause the film to stick prematurely or catch on rubber seals. Following these steps helps guide the vinyl into place cleanly:
- Lay down a layer of tape over the chrome trim.
- Leave about a quarter inch of vinyl material to tuck, then cut away the excess.
- Lift the vinyl material up off the trim completely.
- Fold a piece of backing paper in half to make a sharp crease, then slide it between the trim and the vinyl.
- Use a hard, thin-edge squeegee or tuck tool to press the vinyl underneath the trim while sliding the backing paper along the window.
Vinyl Film Performance
Using proper installation methods ensures edges stay down securely around exterior mouldings. Aura Vinyl vinyl wrap uses a PET backing and German-made adhesive designed for pliability and smooth repositioning around car panels.
FAQ
How much vinyl wrap should you leave to tuck under trim?
Leave about a quarter inch of material along the edge to tuck underneath the trim before removing the excess.
Why use folded backing paper when tucking vinyl wrap?
Sliding folded backing paper between the trim and the film stops the adhesive from catching on rubber gaskets. This lets a tuck tool slide along the edge and push the wrap into place smoothly.
What tools are needed to tuck vinyl wrap under window trim?
You need tape to cover chrome, folded release backing paper, and a hard, thin-edge squeegee or tuck tool.