This wrap demonstration features a silver 2008-2016 Audi.
In the video, an installer explains why you should never heat the material and squeegee at the exact same time. Heating up the material and squeegeeing at the same time leads to glue lines and wrinkling. Squeegeeing while heating stretches the film unevenly and leaves visible defects on the vehicle panel.
Squeegee technique
If you need to heat the material while it is on the car, heat the area up first and let it cool. Allow the vinyl to cool for about 3 to 5 seconds. After it has cooled, take your wrap glove or squeegee and start working out all the air from behind the vinyl. Giving the film time to rest before smoothing keeps the adhesive layer stable and creates a clean, flat result.
Aura Vinyl vinyl wrap features a cast polymer hybrid build with German-made adhesive to reduce glue lines and aid repositioning. Its PET backing provides a smooth, flat look with less orange peel.
FAQ
Why should you avoid squeegeeing vinyl while heating it?
Heating the material and squeegeeing at the exact same time leads to glue lines and wrinkles. This damages the adhesive layer and ruins the final appearance of the wrap.
How long should vinyl cool after applying heat?
Let the vinyl cool for about 3 to 5 seconds after heating it on the car. Once it has cooled, use a glove or squeegee to work out the trapped air.