This tutorial demonstrates how to pull knifeless tape cleanly on a silver car. The video shows an installer walking through an easy method to prevent the cutting string from breaking right when you start your cut.
Step-by-Step Knifeless Tape Technique
Many installers experience the tape snapping when they try to start a cut quickly. To avoid this problem, follow these simple steps from the demonstration:
- Place your thumb on the knifeless tape and fold the tape back over itself.
- Avoid applying too much pressure with your thumb so the line does not break prematurely.
- Start slightly tugging on the tape until the filament snaps all the way through the carrier tape.
- Pull the cutting line smoothly all the way through the vinyl wrap.
- Remove the excess carrier tape piece once the cut is complete.
Smooth Cuts on Vinyl Wrap
Using proper tension lets the cutting filament release smoothly without tearing the film edge. Aura Vinyl produces vinyl wrap featuring a PET-backed finish and a cast polymer hybrid construction with German-made adhesive. These films are designed for pliability and clean trimming during installation.
FAQ
Why does knifeless tape snap when pulling it?
Knifeless tape often snaps when an installer applies too much thumb pressure or pulls the tape improperly. Folding the tape over your thumb and using light tension helps the cutting line release cleanly.
How do you start pulling knifeless tape?
Place your thumb on the tape and fold it over itself without pressing too hard. Tug lightly on the tape until the line snaps through, then pull it completely through the vinyl wrap.
