This vinyl wrap tutorial demonstrates how to trim material cleanly on a silver car.
The video shows an installer demonstrating the easiest method to start and pull knifeless tape without breaking the cutting filament. Many installers have trouble pulling knifeless tape, or find that the filament snaps when they try to pull it like the pros. Using proper hand placement and controlled tension prevents the line from breaking early.
Steps for Knifeless Tape
Follow these steps from the video to get a clean cut:
- Place your thumb directly on the knifeless tape.
- Fold the tape over itself.
- Avoid applying too much pressure so the filament does not break.
- Slightly tug on the knifeless tape until it snaps all the way through.
- Pull the filament all the way through and remove your excess piece of film.
Taking your time with this folding technique creates a reliable start and prevents wasted wrap material. Aura Vinyl vinyl wrap features a PET-backed finish and German-made adhesive to make trimming and positioning smooth on every panel.
FAQ
Why does knifeless tape snap when pulling it?
Knifeless tape snaps when too much pressure is applied or when it is pulled incorrectly. Folding the tape over your thumb and tugging slightly helps the filament release cleanly.
What is the easiest way to start knifeless tape?
Place your thumb on the tape and fold it over itself without pressing too hard. Tug gently until the line snaps through the vinyl, then pull it all the way through and remove the excess piece.