This installation tutorial features a silver car receiving a vinyl wrap edge finish.
Working around rubber trim can be tricky because soft window seals often grip the adhesive before the material sits in place. This video demonstrates an installer technique that prevents sticking, bunching, and trim damage along edges.
The Backing Paper Method
Getting a clean tuck starts with a scrap piece of release liner. First, fold the backing paper in half to create a sharp crease. Next, slide and wedge the creased paper directly between the rubber seal and the vinyl film. The slick side creates a temporary barrier so the film slides freely instead of grabbing the rubber.
Once the paper is in position, take the hard edge of your squeegee to tuck the vinyl into the gap. Work your way down the seam by shimming the paper along as you press the vinyl in place. When you pull the paper away, the material sits flush behind the trim with a smooth, factory-style edge.
About the Film
Aura Vinyl vinyl wrap features a PET-backed finish and German-made adhesive designed for smooth repositioning and clean installs around tight gaps.
FAQ
Why use backing paper to tuck vinyl wrap?
Folding backing paper and placing it between the rubber seal and the film stops the adhesive from grabbing the rubber trim. This allows the squeegee to push the vinyl into the gap cleanly without bunching.
What tool should be used to tuck vinyl behind seals?
Use the hard edge of a squeegee to tuck the vinyl while sliding the creased backing paper down the edge of the seal.
