Tucking Vinyl Wrap Under Window Seals
This vinyl wrap demonstration shows an edge tucking technique on a white 2017-2023 Tesla Model 3. The video shows how to tuck vinyl under rubber window trim cleanly so you do not waste money redoing panels. Rubber window seals can grab the adhesive before the material sits in place, which risks ruining the panel.
To make the install easier, follow the steps shown in the video:
- Take a piece of release backing paper with the slick side out and fold it in half with a sharp crease.
- Wedge the folded backing paper in between the rubber seal and the vinyl.
- Take a thin hard edge squeegee and start tucking the material underneath the backing paper.
This lets the material slide right in because it is not sticking to the trim. By the time you are done, your finished edge will look clean and properly seated.
Vinyl Wrap Features
Aura Vinyl vinyl wrap is a cast polymer hybrid film engineered with a German-made adhesive for pliability and easy repositioning. It includes a PET-backed finish that gives the surface a smooth look with less orange peel, helping installers achieve clean edges around tight molding.
FAQ
Why does vinyl wrap stick to rubber window trim during installation?
Rubber window seals tend to grab vinyl adhesive before the film is properly aligned. Using folded slick backing paper between the seal and vinyl stops the film from sticking prematurely.
How do you slide vinyl wrap underneath window molding?
Wedge folded release backing paper between the seal and vinyl with the slick side out. Then push the vinyl underneath the backing paper using a thin hard edge squeegee.
