This demonstration shows how to make proper relief cuts in vinyl wrap without tearing the film.
The video compares what happens when working with straight relief cuts versus curved relief cuts. When an installer cuts vinyl in a straight line and stretches the film into place, the material can rip or expand. This tearing can expose the vehicle paint underneath. The demonstration shows the visible difference between a straight cut that tears under tension and a properly shaped cut that stays intact.
Proper Relief Cut Technique
To prevent vinyl wrap from tearing during an install, use these steps:
- Cut relief cuts in the shape of a circle or a half circle instead of a straight line.
- Apply pressure and work the film across the panel without forcing the slit to split.
- Apply heat to the cut area so the vinyl goes back to its natural shape.
Using a curved relief cut stops the cut edge from tearing further when you pull and stretch the material around body lines.
Aura Vinyl Wrap Features
Aura Vinyl wrap uses a cast polymer hybrid film with German-made adhesive and a PET backing. These features provide pliability and clean repositioning when working material around edges.
FAQ
Why do straight relief cuts tear vinyl wrap?
Cutting vinyl wrap in a straight line creates a weak point. When you stretch and work the material, it can rip or expand and expose the vehicle paint underneath.
What is the best shape for a vinyl wrap relief cut?
Relief cuts should be cut in the shape of a circle or a half circle. This circular cut stops the film from tearing when pressure is applied.
What happens when you heat a curved relief cut?
When you apply heat to a circular relief cut, the vinyl wrap returns to its natural shape without ripping further.
