This guide shows how to cut vinyl wrap on a silver car door to keep the original paint covered.
Proper Door Gap Cutting
The video demonstrates the correct cutting method when wrapping gaps between vehicle doors. Beginners often cut along the wrong edge when preparing to tuck the material. Slicing directly on the working panel leaves no excess vinyl, which causes the original paint to show through the door seam.
Instead of cutting on the panel you are wrapping, use the opposite edge of the adjacent panel as your guide. For instance, when wrapping a front door, run your blade along the edge of the back door. This approach provides a straight, consistent cut every time. Most importantly, it leaves enough excess material to tuck neatly behind the door edge so factory paint stays completely hidden.
Wrapping with Aura Vinyl
Aura Vinyl vinyl wrap features a PET-backed finish designed for a flat look with reduced orange peel, along with a cast polymer hybrid construction and German-made adhesive for easier repositioning.
FAQ
Why does original paint show after wrapping car doors?
Original paint shows when an installer cuts on the edge of the working panel instead of leaving extra vinyl. This leaves no excess material to tuck behind the panel gap.
Where should you cut vinyl wrap when wrapping a door?
You should cut along the opposite edge of the adjacent panel. For example, when wrapping a front door, cut along the edge of the rear door to ensure enough film remains for tucking.
What is the expected lifespan of Aura Vinyl wrap?
Aura Vinyl vinyl wrap has an expected lifespan of 3 to 5 years with proper care.
