Hyper Gloss Iridescent White

Hyper PPF is an advanced film. It goes on dry like vinyl, but it's less forgiving. The mirror-like finish shows glue lines, the TPU stretches more than vinyl and is easy to overstretch, and mistakes cost more because PPF colors are only sold by the full roll. We recommend at least intermediate vinyl install experience before you buy. New to wrapping? Start with vinyl, or find a shop to install it. Before you order, read how Hyper PPF works for beginners and our PPF installation tips.

Sizing

• 56 ft (standard): Teslas, coupes and most sedans.
• Large sedans, crossovers, SUVs and trucks need more. Add length with the options above.

Order about 10 ft more than you measure. PPF is made in smaller batches than vinyl, so a later order may not match the shade. Colors are only sold by the full roll, so once your order ships, more material means another full roll.

The film

Hyper PPF is TPU, not PVC like vinyl. It absorbs impacts and resists rock chips, and its hydrophobic top coat heals light scratches on its own in about an hour at room temperature. It installs dry: wipe each panel with the PPF Panel Prep that comes free with every roll, let it flash off, then lay the film. Prefer a wet install? Plain water works.

Before you order

• All sales are final. Not sure about the color? Get a free swatch chip first.
• Leave time to receive and check the roll before your install date. Open the box when it arrives and check the color and length.
• Report any problem within 7 days of delivery, with photos, and don't start installing until we reply.
• We only accept returns or exchanges for our mistakes or an accepted warranty claim.

Storing and installing

• Keep the roll tight and store it flat in its box at 70 to 80 °F, out of the sun. Cut each piece as you need it and re-tighten the roll. If you pre-cut pieces, take the cap sheet off first. Use partial cuts within 30 days to avoid tunneling.
• Don't use Tack Reducer. Hyper PPF is low-tack and won't stick. Use the PPF Panel Prep instead.
• Install at 70 to 80 °F, out of direct sun. Squeegee with firm pressure and let trapped air out, or it can bubble in the sun.
• Post-heat every edge and seam to 220 °F. TPU soaks up more heat than vinyl, so check it with a laser thermometer.
• Every roll comes with an invite to our Discord, where our installers help live. Read our PPF installation tips first.

Care

• Care for it like a vinyl wrap. A ceramic coating on top gets the most life out of it.
• Hand wash at least every two weeks with a pH-neutral, vinyl-safe shampoo. Never use an automatic car wash.
• Never use carnauba wax, quick detailers with wax, solvents, tire shine or household cleaners.

Cared for like this, expect 6 to 10 years. Read the full care instructions.

Warranty

We'll replace Hyper PPF that discolors early, within 6 years of purchase (10 years with the Extended Warranty), as long as the care instructions were followed and you can show proof of ceramic coating. We also cover visual and adhesive defects that show before or during install. If you see one, stop installing and contact us.

Not covered: labor (install, removal or lifted clear coat), install workmanship, collision or road damage, film applied over body filler, rust or unpainted surfaces, and film layered with other brands' film. Read the full warranty terms.